Articwood Camel Wood Effect Floor Tile

These tiles are unsuitable for a herringbone design as they are too short and too wide.

There is no set number of pattern repeats for this tile. The design has eight set canvases measuring 28x230CM which will be manipulated in size and rotation to create as many different patterns as possible.

Yes, technically these tiles can be installed outside, but must be installed onto a cured concrete base and adhered using a full bed of exterior tile adhesive. Please note the tile holds an R9 anti-slip rating which we would deem best used in dry indoor areas, it would be advisable to look for a tile with at least an R11 rating.

Yes, they are suitable to be laid on a chipboard floor as long as you are using a latex-based adhesive and an anti-fracture membrane

This tile is only available in this size. However, for a similar but longer tile, please take a look at the Graziella Roble Oak Wood Effect Porcelain Floor Tile (sku 449720).

Provided that the concrete is flat and level, and has been primed with a suitable primer such as Primer G (sku 020101), then the tiles can be laid directly onto it.

These tiles are unsuitable for a herringbone design as they are too short and too wide.